Product description
Type:
HZ-QL
Character:
White
powder,granularity<20 mesh, Moisture <0.5%
Principle and function:
Since the die-casting furnace has been used for long time without being cleaned
in time, a lot of clinkers are accumulated on melting furnace wall and bottom,
which will reduce aluminium capacity and melting efficiency and increase die
casting cost.
The conventional furnace cleaning method is to stop the furnace and cool down
for a period of time, then break the clinker down with steel bar and other hard
tool, which has high intensity of labor and is liable to damage melting
furnace, so it is a way of no choice.
The new type furnace cleaning flux produced by our plant contains a large
quantity of matter which will protect the furnace and remove the accumulated
slag easily.
Use method:
After metal liquid is tapped, reheat the furnace till it turns into dark red
colour, spray some furnace cleaning furnace by powder spraying cylinder. After
reacting for 3-5 minutes, skim the accumulated slag with a rake. For thicker
slag, repeat for 2 or 3 times and remove the slag completely.
Technical parameters:
Temperature>800o C.
Use level:
It depends on thickness of slag on furnace wall.
Technical indexes:
Moisture<1.0%, Grains size-18mesh.
Packaging and storage:
It is